Articles
PeakTech® 6090
120 W Industrial Power Supply DIN-Rail Mount, 10 A/12 V DC
Compact DIN mounted 120 W switching mode power supply is designed for a wide range of control equipment which demands good quality regulated DC power source with excellent EMC immunity and electrical performance in an industrial environment. Up to five units can be connected in parallel.
- 45 - 55 kHz switching frequency at full load
- electro-galvanized steel & aluminium enclosure and poly-carbonate front panel
- case protection: IP20 (IEC529)
- mounting: snap on type with self locking can be installed on 35 mm DIN-rails 7,5 or 15
- Safety: EN-60950; safety class: degree auf protection 1 (IEC5360)
- Accessories: manual
| full load AC current | 2,8 A at 100 V AC; 1,2 A at 230 V AC |
| no load AC current | 100 mA at 100 V AC; 140 mA at 230 V AC |
| inrush current; cold start at | 25°C 25 A at 100 V AC; 55 A at 230 V AC |
| leakage current | 2 mA |
| power factor | min. 70 % |
| efficiency | 82 % at 100 V AC; 83 % at 230 V AC |
| nominal voltage | DC 12 V |
| voltage adjust range | 10,5 - 14 V |
| rated current | 10 A |
| rated power | 120 W |
| ripple & noise (peak to peak) | ≤ 50 mV |
| line regulation | ≤ 0,2 % |
| load regulation (10 - 100 %) | ≤ 0,3 % |
| hold-up time (full load) | >30 msec. at 100 VAC; >40 msec. at 230 VAC |
| parallel operation | max. 5 units selectable |
| over load/over current | 10,8 - 11,4 A, C.C. auto-restart |
| output over voltage | 16,5 - 18,5 V DC |
| working temperature | EN60950: -10°C ... 60°C (UL508: 0 ... 40°C) |
| working humidity | 20 - 90 % RH |
| operating voltage | 90 ~ 260 V AC; 47 ~ 63 Hz |
| dimensions (WxHxD) | 60 x 125 x 125 mm |
| weight | 880 g |
