Articles
PeakTech® 6095
100 W Switching Mode Power Supply
DC 1 - 20 V/0 - 5 A
100 W switching mode power supply with current limiting control, is designed with the objectives of high accuracy, compactness and easy portability. The large and illuminated LCD display provides clear and sharp readings even under dim light. Output over voltage protection ensures a better and tighter protection to voltage sensitive loads. Excellent line and load regulations, high efficiency, low ripple & noise that are typical of advanced switching mode power supplies.
- Illuminated LCD indications of A, V, output ON-OFF, CC & CV
- 4 digit, 13 mm displays of Volt and Amp meters
- Voltage and current controls
- Output over voltage protection, short circuit, overload and over temperature protections
- Safety: EN-61010-1, EMC: EN-55011
- Accessories: power cable, test lead and manual
| Output voltage adjustable range | 1.0 - 20 V |
| Output current adjustable range | 0 - 5 A |
| Load from 10 % to 100 % variation | 70 mV |
| Line from 180 to 264 V AC variation | 20 mV |
| Ripple & noise in r.m.s. | 5 mV |
| Ripple & noise (peak to peak) | 30 mV |
| Load from 10 % to 100 % variation | 20 mA |
| Line from 180 to 264 V AC variation | 20 mA |
| Ripple & noise (peak to peak) | 20 mA |
| Switching operation frequency | 80 - 120 kHz |
| Power factor | 0,68 |
| Efficiency at maximum power | 84 % |
| Voltmeter accuracy | ± 1,0 % + 3 dgt. |
| Ampermeter accuracy | ± 1,0 % + 3 dgt. |
| LCD-display | CC, CV, A, V, output ON-OFF |
| Operation voltage | 200 ~ 240 V AC; 50/60 Hz |
| Dimensions (WxHxD) | 70 x 150 x 250 mm |
| Weight | 2 kg |
| EAN-13 | 4250569401497 |
